Second Grade Science Projects
A New Look At The World Around Us!
Second Grade Science Projects Series
One of the earlier projects discusses what a compass does, but if the magnet-science-projects page is right, shouldn’t we be able to make a compass ourselves? Well, the answer is yes - if only we could make a magnet. So we’ll focus on the magnet in this project and save the compass for the next one. But this is still one of the second grade science projects, so we’ll stick to using paperclips here, and the teacher can demonstrate using a magnetized needle for making the compass itself later.
This second grade science project is designed to introduce young students to the concept of magnetism by using everyday items they are most likely already familiar with.
Magnetite (if available)
Several general-purpose bar magnets of different strengths
One very strong Bar or U magnet
One small hammer
This second grade science project requires one small step in advance. One or two days before the class project, put at least one paperclip for each project group you will have on the north side of the very strong magnet and leave them there.
Ask the students if any have used a magnet before. Let them give as many examples as they can, then ask if any of them ever made a magnet. If yes, great! Ask if they remember how. Chances are that nobody will raise their hand, so ask how many would like to learn how to make a magnet to get the fun started. If you have enough students for a couple groups, give each group a set of bar magnets and about a dozen paper clips. Please be sure to set some second grade science project lab rules … like the paperclips stay on the table until it is time to do the experiment, and then, only one person touches them at a time, etc.
Explain that magnets have a north and south pole, just like the earth. If this lab followed a compass project similar to this one, great … break out a compass from last time to remind them that it always points north.
If not, give them a few minutes with the compass. Have them get in a circle, pass the compass around and have everyone who holds it point in the same direction as the compass needle. When the last student has had a chance to hold it, have everyone look to see where everybody else is pointing. That is north. Make sure to tell them it does not matter which way you turn the compass; it will point north (at least in this experiment!!). And that is because it has a magnet in it.
To shift the focus of this second grade science project back to the magnet itself, ask them to look at the bar magnets. Show them that one end has an “N” on it and the other an “S”. That stands for north and south. The “N” is marked N, because a compass needle will point toward it if it gets close enough. We could also use it to make a compass if it were small enough.
Give two or three students in each group a different magnet. Ask each to try and pick up just one paperclip with it. Then see if any can pick up another by only touching the end of the paperclips together. See who can make the longest chain of paperclips and make sure they understand the reason one magnet can pick up more than another is because it is stronger. Also let them know that the magnet has turned the paperclip it just picked up into a magnet as well. The next paperclip it picks up has also become a magnet, but weaker. Sooner or later one of the next paperclip “magnets” in our second grade science project will not be strong enough to pickup any more.
Give the students some time to play with the magnets and paperclips. Make sure everyone gets a chance to pick up a few paperclips. Then, take one of the magnets, pick up as many paperclips in a chain as you can while the students all watch and be sure to tell the whole group again what they should remember about the experiment (same as in the paragraph above).
While they are all watching, raise the paperclip chain up so all can see. Ask them what they think will happen if the magnet is taken away. (Part of the purpose for any second grade science project is to make a prediction, then test to see if it holds true).
Hold the paperclip that touches the magnet with one hand and remove the magnet from it with the other. Does the chain of paperclips stay attached? No - they will all fall off. Tell them this is because each of the paperclips were only temporary magnets. They were only “magnetized” when they were touching a real (or permanent magnet).
Bring out the strong magnet you put aside for a few days and show the students in this second grade science project the paperclips it has been holding. Take the paperclips off the magnet, and one-by-one, connect them together, just like before to show that this magnet will pick up a chain of several paperclips too. But this time things will be a bit different. Take one of the paperclips off the strong magnet, hold it up and ask the class if they think this paper clip will pick up another one all by itself. To make the point even clearer, take one of the paperclips from the last experiment off the desk and try to pick up another one from the desk all by itself … see, nothing happens.
After they decide, lay the same paperclip flat on the strong magnet and rub it back and forth against the magnet at least 30 times. Now try to pick up other paperclips. It works! Use a paperclip that was on the strong magnet for a couple of days to pick up another. It works too! They should be surprised and will wonder what just happened … now you’ve got them!
Tell them to cover their ears, put one of the magnetized paperclips on the table (or floor if you prefer) and strike it sharply with a hammer. Now try to pick up another paperclip that was not on the strong magnet with it. It doesn’t work any more. The same paperclip will no longer pick up any others!
What just happened?
For the teacher – individual grains in the paperclip have magnetic fields all their own. The longer they are placed in a stronger magnetic field, or are "cold worked" in a magnetic field, the more likely their fields are to align, or point, in the same direction. The final result is that most of the individual field strengths add together and that paperclip’s overall magnetic field is now strong enough to pickup another paperclip. In other words, the first paperclip has become magnetized. When you hit the paperclip with a hammer (or heat it up too much if you have time to try that as well), the temporary alignment that was forced by the stronger magnet is destroyed and the individual magnetic fields start canceling each other out again. In other words, it looses its ability to pick up paperclips.
For the students – we can turn a paperclip into a magnet by having it touch a strong magnet for a long time, or by rubbing it against a strong magnet several times. Our second grade science project shows that it has become a magnet by using it to pick up other paperclips all by itself. (Let them try to pick up paperclips with the magnetized paperclips if you have time). It stays “magnetized” after the other magnet is removed because the metal that makes up the paperclip has tiny “magnets” in it that will all try to point in the same direction if you let it touch the big magnet long enough. But, if you hit it with a hammer, the tiny magnets are shaken back into pointing in different directions again. It is no longer magnetic and just returns to being just another paperclip again.
Summarize by answering the original question: Can we make a magnet?
This second grade science project is designed as a follow-on to the make a magnet experiment above. We show how to make a compass out of common everyday items, and continue introducing young students to the concept of magnetism.
Strong Bar magnet
Small block of Styrofoam
Small cork, cut so it will float with the flat side up
Plastic or glass bowl large enough to hold the Styrofoam
About a pint of water
The only preparation needed for this second grade science project is to collect the materials in advance.
Gather everybody around the table you will use for the demo. Tell them in this second grade science project, we will see if it is possible to make a compass.
(If you have not done a compass experiment yet, now might be a good time to take the compass out and show them how it works. A very basic project is available at What a compass does if needed.)
When ready, put just enough water in the bowl so that the Styrofoam will float without hitting the bottom of the container. Balance the bar magnet on top of the Styrofoam and watch what happens!
The “N” part of the magnet will point North. Get the actual compass out. Keep it well away from the magnet or the compass won’t point in the right direction … and show the students what the compass says is North.
Now carefully pick up the bowl of water and try to move around so that the “N” part of the floating magnet points in a different direction. Be sure to let the students see that no matter what direction you turn, the magnet will point North. And … that is precisely the point. We just made a compass out of an old magnet, a bucket of water and some old left-over piece of styrofoam! (Kinda like what MacGyver would do?).
Now take one of the smaller paperclips and unfold it so you have one end with a hook and the rest as a straight piece of wire. Rub the end of the paperclip (without the hook) against the magnet back and forth at least 30 times. Rubbing only about ½” on the end of the paperclip should do just fine. Make sure you magnetized it by trying to pick up another paperclip. Rub it on the magnet again if it appears to be too weak.
When the wire is magnetized, continue on with this second grade science project by carefully balancing it on the flat cork, then float the whole works in the bowl of water.
It will be slower this time because the magnet is not as strong, but you should see the straight end of the paperclip heading toward North.
What just happened?
For the teacher – The final result for this second grade science project is that both the magnet and the magnetized paperclip try to align their magnetic fields with the earth’s, but the force of friction on the table top acts like glue to keep them from moving. However, when we float these on water, they are able to move freely. When they do that, they point North. If they always point North, we have a compass!
For the students – A magnet “wants” to point North all the time. When we float it on the water, (hang it by a thread, balance it on a pin point, etc), it is free to move like it wants to. When that happens it points North. When it does that all the time, we have a compass.
Summarize by answering the original question: Shouldn’t we be able to make a compass ourselves?
More Second Grade Science Projects soon!
Exit Second Grade Science Projects to the Homepage